T-Clean Gel S-1
T-Clean Gel is specially intended for brush pickling of weld seams and smaller surfaces. They offer a perfect paste consistency that gives good adhesion to difficult surfaces and reduces the risk of splashing.
Description : Thickened pickling gel.
How to work : Pickling gel for removal of weld scale & heat discoloring area surrounding the welds.
Application : With acid resistance brush, allow time to take effect, scrub and wash off with water, working temperature 5° to 40° C.
Usage : 100 mtr.Weld run per kg.
Duration : 20 to 30 Minutes
T-Clean Spray S-2
Description : Semi Gel (Spray form)
How to work : To clean large fabricated equipment e.g. Vessels equipment,Tank equipment,Internal & External surface.
Application : With acid resistance brush or hand pressure spray pump.
Usage : 50 to 60 Sq.Ft. per kg.
Duration : 30 to 45 Minutes (Depend on scale).
T-Clean Passivation S-3
T-Clean Passivating agents improve the pickling result and diminish the risk of discoloured surfaces, after pickling. The passivation layer on metal surfaces is restored at the same time.
Description : Metal surface passivation (Liquid Form).
How to work : Passivation the Metal surface form further corrosion project.
Application :Liquid format and use with Hand Pressure Spray Bottle.
Usage : 50 to 60 Sq.Ft. per kg.
Duration : 5 to 10 Minutes.
T-Clean Soft Solution S-4
T-Clean Soft Solution for removing oil, grease, buffing compounds etc. from any metal surface.
Description : Metal Oil Degreaser (Alkaline & Acidic based).
How to work : It works to metal surface remove oil,grease & other particles.
Application :With brush,sprayer bottle & also scrubbing with scrubber pads.
Usage : 20 Sq.Ft. per kg.
Duration : Depending on job.
T-Clean Action S-5
T-Clean Action (S-5) is used to clean Stainless steel components and also large tanks. T-Clean Action (S-5) leaves a clean professionally finished stainless steel.
Description : Pickling (Liquid Form).
How to work :It is used to clean complicated items Deeping process into large tank as well as internals of pipeline.
Application :Deeping Process in tank & by Acid resistance pump is circulated.
Usage : 60 to 70 Sq.Ft. per kg.
Duration: 30 Minutes to 1 Hour.
T-Clean Cold S-6
Description : Pickling and Passivation both (Liquid Form).
How to work : It is used to clean complicated items Deeping process into large tank as well as internals of pipeline.
Application :Deeping Process in tank & by Acid resistance pump is circulated
Usage : 60 to 70 Sq.Ft. per kg
Duration : 30 Minutes to 1 Hour
T-Clean Electrolyte Machine
( 16V/ 40 Amp )
T-Clean Anti Spatter is a water-based, silicone-free, anti-stick separation agent for preventing adherence of spatter to welding surfaces.
Description: Weld joint Cleaning Machine.
How to work: It removes carbon.
Application: After Welding cleaning by current conductivity by carbon
Duration: Maximum Timing 5 minutes
T-Clean TM Spray
Description : Stainless Steel Cleaner & Polish
How to work : T-Clean TM Spray removes Carbon & Finger impressions on the metal and passivate it
Application :T-Clean TM Spray is sprayed on the job. Then scrub it with soft scrubber pad and atlast wipe out with micro fibre cloth .
Usage : Depending on job
T-Clean TWC 25
An solution that is an economical,low-viscosity, low-toxicity,noncombustible welding torch coolant.The special formulation includes a corrosion inhibitor to protect torch heads and the internal parts of the cooling system.
Description :Welding System Coolant.
Usage : Protect the complete cooling and torch system from electro corrosion.
T-Clean Anti Spatter
Description : Spatter Removal.
How to work : It is used before welding and a splash or spot of something spattered.
Application :Before welding brush the nearest weld area.
Usage : Depending on job.
Duration : Depending on job.
T-Clean Nozzle Gel
Description : Mig gun tips cleaning
How to work : It removes carbon from mig gun tips.
Application :Before welding dip Mig Gun in Nozzle Gel than welding.
Usage : Deep nozzle in gel.
Duration : Depending on job..
T-Clean EP Brightner
Description : Reverse Current Electro Polishing Brightner.
How to work : T-Clean Electro polishing Brighter is a additional extra brightness Chemical for Stainless Steel equipment for Removal of weld Scale & Heat Discoloring Areas Surrounding Internal & External Surface.
Application : The Process are Deeping. Component Deep in tank and allow to take time minimum 30 Minutes to Effect. and washing with water,Working temperature 80 to 90 C. with water. Working temperature 5 to 30 C.
Usage : Depend job & Chemicals.
T-Clean Oil Cutter
T-Clean Oil Cutter is Non Ferrous metal cleaner, oily surface Cleaning is very Smooth (Bottom base).
Description :Metal Oil Cutter.(Non Ferrous)
How to work : T-Clean Oil Cutter is any oily surface Clean is very Smoothly.
Application : Depend in job to applied with hand pressure pump Spray in all Surface area, Brush Applied & Deeping Process. & Allow time to take Effect, Scrub and wash off with water. .
Usage : Depend job & Chemicals.
T-Clean Eco Gel
T-Clean Eco Gel is Specially Stainless Steel Eco friendly weld Joint Clean (Bio grade).
Description : Thickened Eco Gel (Bio Grade).
How to work : T-Clean Eco Pickling Gel for Removal of weld Scale & Heat Discoloring Areas Surrounding the welds.
Application : Applied brush in weld Scale area, Allow time to take Effect, Scrub And wash off with water. Working temperature 5* to 30* C.
Usage : 50 mtr. Weld Run Per Kg.
Duration : 30 to 40 Minutes.
T-Clean Eco Spray
T-Clean Eco Spray Which is non acidic Pickling Chemical use to Stainless Steel larger surfaces.(Bio grade).
Description : Semi Spray (Bio Grade).
How to work : T-Clean Eco Spray is large Fabrication equipment for Removal of Weld Scale & Heat Discoloring areas Surrounding Internal & external Surface.
Application : Applied with hand pressure pump spray in all area, Allow time to take Effect, Scrub And wash off with water. Working temperature 5* to 30* C.
Usage : 40 to 50 Sq Ft. Per Kg.
Duration : 40 to 50 Minutes.
Our Other Products
- Metal Heating Protector Lacquer
- Top Coat Laquer ( Water Soluble )
- Reverse Current Electro Polishing Chemicals
- T Clean Nutrilizer
- T Clean Electrolyte Chemical